Aervoe 249 15 oz. Fluorescent Pink Construction Marking Paint
Aervoe 249 Description
The flagship of the marking paint line offering a high-quality paint that is priced competitively to meet a variety of upside-down marking applications, while providing good color visibility and durability.
This quality marking paint is packaged in a can that may only be operated in an upside down position. It is formulated to meet a variety of marking applications while still providing good initial color visibility, good color retention, and adhesion.
Aervoe 249 Includes
- (1) 17 oz. Marking paint
Aervoe 249 Features
- Mark lasts up to three months
- Meets standards set by OSHA and APWA/ONE Call Systems
Aervoe 249 Specifications
| Color | Fluorescent Pink |
| Container Size | 20 oz. |
| Net Weight | 17 oz. |
| Benefits | Provides great color durability for up to 3 months, depending on traffic and exposure. It meets standards set by OSHA and APWA/ONE Call Systems. It is not affected by moisture or water and it will not wash away once dry. Can be used with the cap on in Aervoe applicators #244/245. The spray-through cap eliminates accidental discharge. Each can is non-clogging and empties completely. |
| Uses | Designed to adhere to most surfaces, including pavement, gravel, and soil. It can be used for marking at construction sites, locator and utility identification, landscaping, or other general marking requirements. It is not recommended for use on short cut grass such as golf course greens. |
| Application | Shake can well before use and for 1 to 2 minutes after agitator ball is heard. Remove tab from tamper-resistant cap. With proper alignment of the activator bar, this product can be used with the cap on in Aervoe applicators #244/245. Apply paint 3 to 4 inches from surface as a writing tool, and 5 to 8 inches in the applicator for a ¾-inch line or continuous directional mark. Keep can in motion during use to prevent puddling. Agitate can periodically during application. Clear paint from valve and tip after each use by turning can in an upright position and spraying for 3 to 5 seconds. For best results, use at temperatures between 60°F and 80°F (16°C to 27°C) |
