Simpson Strong-Tie THGQ3-SDS4.5 (4-15/16″ x 16″) 7Ga Quick-Install Galvanized Truss Hanger for Girders
Simpson Strong-Tie THGQ3-SDS4.5 Description
The THGQ3-SDS4.5 Girder Truss Hanger is a cost-effective solution for multi-ply trusses, featuring high load capacities and easier installation with SDS Heavy-Duty Connector screws.
Simpson Strong-Tie THGQ3-SDS4.5 Includes
- (1) THGQ3-SDS4.5 Girder Truss Hanger
- (1) Set of SDS Heavy-Duty Connector Screws
Simpson Strong-Tie THGQ3-SDS4.5 Features
- High load capacities for multi-ply girder trusses
- Easier installation compared to bolted hangers
- Includes Strong-Drive SDS Heavy-Duty Connector screws
- G90 Galvanized finish for durability
Simpson Strong-Tie THGQ3-SDS4.5 Applications
- Multi-ply girder trusses in construction
- Structural support for heavy-duty applications
- Projects requiring high load capacities
Simpson Strong-Tie THGQ3-SDS4.5 Installation Overview
- Use all specified fasteners
- Install by filling round holes only or both round and triangle holes for maximum values
- Ensure all multiple members are fastened together to act as a single unit
- Verify the thickness of the supporting girder matches or exceeds the screw length
- Adequately brace girders laterally to prevent displacement due to torsional stresses
Simpson Strong-Tie THGQ3-SDS4.5 Specifications
| Finish | G90 Galvanized |
| For Treated Lumber | No |
| Height | 16″ |
| Width | 4-15/16″ |
| Fasteners required | All Fasteners Included |
NOTE: The thickness of the supporting girder must be equal to or greater than the screw length. For applications where the length of the supplied screws exceeds the thickness of the supporting girder, 3″ or 4 1/2″ screws may be substituted for the longer length screws with no load reduction, or a shim block may be used as approved by the Designer.
