Simpson Strong-Tie SL31112H (5/16″ x 1-1/2″) Sleeve-All Hex-Head Sleeve Anchor – Carboon Steel (100 Pack)
Simpson Strong-Tie SL31112H Description
Sleeve-All Hex-Head Sleeve Anchors are pre-assembled expanding anchors designed for use in solid base materials, offering optimal performance in structural applications.
Simpson Strong-Tie SL31112H Includes
- (100) Sleeve-All Hex-Head Sleeve Anchors
Simpson Strong-Tie SL31112H Features
- Pre-assembled expanding anchors
- Optimal performance in structural applications
- Suitable for solid base materials
- Available in various head options
Simpson Strong-Tie SL31112H Applications
- Securing into concrete and brick
- Hollow and grouted CMU anchoring
- Structural applications requiring reliable anchoring
Simpson Strong-Tie SL31112H Installation Overview
- Drill a hole in the base material using a carbide drill bit of the same diameter as the anchor.
- Drill to the specified embedment depth and clean the hole using compressed air.
- Place the anchor in the fixture and drive it into the hole until the washer and nut are tight against the fixture.
- Tighten to the required installation torque.
Simpson Strong-Tie SL31112H Specifications
| Material | Carbon steel |
| Finish | Zinc plated |
| Diameter | 5/16″ |
| Length | 1-1/2″ |
| Drill bit size | 5/16″ |
| Head type | Hex Head |
| Quantity | 100 |
NOTE: Oversized holes will make it difficult to set the anchor and will reduce the anchor’s load capacity.
